LIQUID METAL 179 ML
893.449
- UNSPSC 31201700
0893449 081 1
0893449 081 1
Delivery
In stock delivery from our warehouses.
0 Review(s)
The ideal, quick repair system for fitters and workshops in the field of metalworking. Especially good for filling moulds, sealing and filling in leaks
IN-STORE
(Live stock shown is only for our stores located in Ontario.)
3 pieces in stock at Vaughan, ON as of 6:53 AM. Directions. Call: (289) 474-5447
2 pieces in stock at Mississauga, ON as of 6:53 AM. Directions. Call: (289) 562-1077
- In-store pickup - FREE
- Curbside pickup - FREE
- Same-day local delivery
Product Details
| Attribute | Value |
|---|---|
| Contents | 2 x 89 ml |
| Mixing Ratio | Component A: Component B = 1:1 |
| Initial Setting Time | 7-12 min. (room temperature) |
| Full Hardening Time | 4-24 h (room temperature) |
| Pot Life | 5 min. / 20 g (room temperature) |
| Consistency | Cannot run down |
| Spec. Gravity | 2.80 with Components A and B mixed |
| Compressive Strength | 70 N/mm2 |
| Tensile Strength | 12.5 N/mm2 |
| Shear Tensile Strength | 14.5 N/mm2 |
| Thermal Stability | 0.7 Kcal/mh°C, -60°C to +120°C |
| Dimensional Stability / Martens | +40°C |
| Coefficient of Thermal Expansion | +40x10-61°C |
| Malleable | up to +120oC/1h |
| Storage Stability | Min. 2 years |
Features
| Fe 1 is a high grade, two-component reaction resin system which is formulated specifically to obtain metalline characteristics |
| The ideal mixing ratio of the components (A:B = 1:1; press two strands of equal length out of the tubes) makes it practically impossible to mix the repair compound incorrectly |
| Fe 1 is specifically designed for small repair jobs which must be performed quickly |
| Fe 1 can be applied with a spatula without it running down, so it can also be used for work on a vertical plane |
| After hardening, Liquid Metal Fe 1 can be machined like metal without difficulty by turning, milling, drilling, filling or thread cutting |
Applications
Works on various metals such as aluminum, copper and steel
Instructions
The metals must be cleaned to a bright finish and degreased. Mix components A and B homogeneously in a ratio of 1:1. Apply mixture immediately using a spatula (short pot life). The hardened Liquid Metal can be machined without difficulty by turning, milling, drilling, etc. Please follow enclosed instructions for use
Documents & Videos
.jpg?auto=compress%2Cformat&height=100&width=220&trim=color&trimcolor=FFFFFF&trimTol=15&ixlib=csharp-3.2.1.0&s=3b619c68a0500a2e3f23db8d2b64db97)
.jpg?auto=compress%2Cformat&height=100&width=220&trim=color&trimcolor=FFFFFF&trimTol=15&ixlib=csharp-3.2.1.0&s=da7863f53226dbfa179aff78ca4ab44e)
.jpg?auto=compress%2Cformat&height=100&width=220&trim=color&trimcolor=FFFFFF&trimTol=15&ixlib=csharp-3.2.1.0&s=c6abd5fb2d63bb2b3922cc838f692dc5)
.jpg?auto=compress%2Cformat&height=100&width=220&trim=color&trimcolor=FFFFFF&trimTol=15&ixlib=csharp-3.2.1.0&s=d7e86bb8142402df2ffa5b69d3c60493)
.jpg?auto=compress%2Cformat&height=100&width=220&trim=color&trimcolor=FFFFFF&trimTol=15&ixlib=csharp-3.2.1.0&s=2ae15c19b520e202301e8d1b9b8be440)
Review(s)
Product not yet rated.
