1/2 x 2-3/4 Threaded Rod Hanger for 1/2" Rod ZN
901.50234RH
- UNSPSC 31162104
S123469052
S123469052
Delivery
In stock delivery from our warehouses.
0 Review(s)
1/2 x 2-3/4 Threaded Rod Hanger for 1/2" Rod ZN — 901.50234RH
- 1/4 x 1-5/8 Threaded Rod Hanger for 1/4" Rod ZN — 901.25158RH
- 3/8 x 1-5/8 Threaded Rod Hanger for 3/8" Rod ZN — 901.37158RH
- 1/2 x 2-3/4 Threaded Rod Hanger for 1/2" Rod ZN — 901.50234RH
IN-STORE
(Live stock shown is only for our stores located in Ontario.)
100 pieces in stock at Vaughan, ON as of 10:46 PM. Directions. Call: (289) 474-5447
Not stocked in Mississauga, ON.
- In-store pickup - FREE
- Curbside pickup - FREE
- Same-day local delivery
Product Details
| Attribute | Value |
|---|---|
| Anchor Diameter | 1/2 in |
| Drill hole diameter | 1/2 in |
| Anchor Length | 2-3/4 in |
| Minimum Center to Centre Distance | 3 in |
| Minimum Edge Distance | 1-3/4 in |
| Thread Length | 2-7/16 in |
| Required Torque | 50 lbf.ft |
| Material | Steel |
| Width Across Flats | 11/16 in |
| Minimum component thickness | 4-1/4 in |
| Surface | Zinc Plated |
| Application Condition | Dry Interiors |
| Approvals | ICC-ESR-2713 |
| EAN | 4056807279251 |
Features
| Thread design undercuts to efficiently transfer the load to the base material |
| Serrated cutting teeth and thread design enable quick and easy installation |
| Specialized heat-treating process creates tip hardness to facilitate cutting while the anchor body remains ductile |
| Designed to install using a rotary hammer or hammer drill with standard ANSI drill bits — no special tools required |
| Installs with standard-sized sockets |
| Code listed for cracked and uncracked concrete applications under the 2015, 2012 and 2009 IBC/IRC, per ICC-ES ESR-2713 |
| FM listed |
Instructions
| Drill a hole using the specified diameter carbide bit into the base material to the specified embedment depth plus minimum hole depth overdrill |
| Blow the hole clean of dust and debris using compressed air. |
| Install with a torque wrench, driver drill, hammer drill or cordless impact wrench. |
| Fully insert threaded rod. |
Notices
| Oversized holes in the base material will reduce or eliminate the mechanical interlock of the threads with base material and will reduce the anchor’s load capacity. |
| Use a Titen HD rod hanger one time only. Installing the anchor multiple times may result in excessive thread wear and reduce load capacity. |
Documents & Videos
Review(s)
Product not yet rated.
