TOTAL A/C LEAK STOP W/ UV DYE BAG ON VALVE 66 G

892.764776
0 Review(s)

UNSPSC: 25172709

Some of Wurth Canada's products are labelled exclusively for business use. Please register or sign in as a business customer to access these products.

CLOSE

Technical Information

Contents 66 g
Article Notice For use in R-134a A/C systems only. Includes flexible charging hose.

Customers Also Viewed

Features

Stops small refrigerant leaks in metal and rubber A/C system components
Lubricates A/C system and helps prevent leaks
Contains a UV dye to help pinpoint mechanical leaks in A/C systems
Does not contain polymers; will not harm or clog A/C system components, reclamation or recovery machines
Compatible with PAG, Ester and Mineral oils
1 can treats 1 vehicle
Contains o-ring conditioner additive

Applications

Stops leaks in evaporator, condenser, rubber hoses, gaskets, seals and all types of O-rings including HBR, Nitrile and Neoprene

Instructions

Shake can well before use.
Start engine and set the A/C to MAX; A/C compressor must be engaged to install product.
Locate the LOW pressure service port and remove the cap.
A charging hose is required to use this product. Art.No.892.764776 includes a pre-attached hose. Art.No.892.764777 requires a Reusable Charging Hose (Art.No.764.305000. Read the hose instructions before attaching it to the can.
Purge all air from the hose by slowly dispensing product until the hose is full.
Attach hose to LOW pressure service port. DO NOT attach hose to HIGH pressure service port! This could cause the can to burst and cause serious injuries.
Turn can upside down and depress/open valve to dispense product; dispense entire can (approximately 20 seconds).
Once can is empty, detach hose from LOW pressure port and replace the cap.
To circulate the product, keep the vehicle running with the A/C at MAX for at least 20 minutes.
Dispose of according to local regulations.

You Might Also Like


Review(s)

Product not yet rated.