BSL metal diamond cutting disc - D125mm
668.440125
0668440125961 1
0668440125961 1
New
Delivery
In stock delivery from our warehouses.
0 Review(s)
Very versatile diamond cutting disc with special vacuum-brazed diamond coating (BSL). Especially optimised for metal applications up to a material thickness of 10 mm.
IN-STORE
(Live stock shown is only for our stores located in Ontario.)
Not stocked in Vaughan, ON.
Not stocked in Mississauga, ON.
Product Details
| Attribute | Value |
|---|---|
| Diameter (in) | 5 in |
| Diameter (mm) | 125 mm |
| Thickness (in) | 0.05 in |
| Thickness (mm) | 1.3 mm |
| Arbor Hole (in) | 7/8 in |
| Arbor Hole (mm) | 22.23 mm |
| Number of Segments | 10 pcs |
| Max Rotations Per Minute | 12250 rpm |
| EAN | 4065233076921 |
Features
| Extremely long service life |
| 30 to 50 times longer service life than bonded discs |
| No reduction in external diameter |
| Constant cutting performance and depth over the entire service life |
| Additional laser slots reduce noise and vibration |
Benefits & Advantage
| Environmentally friendlier and safer |
| 100% recyclable |
| Extremely break-proof |
| Fewer sparks |
| No additional dust and odour pollution |
| No expiry date |
| Insensitive to temperature changes and moisture |
Applications
| Particularly suitable for all steel materials, cast iron and plastics and very well for stainless steel. |
| Well suited for non-ferrous metals such as aluminium |
| Also cuts wood, soft stone, ceramic tiles and other mineral materials, but caution: not suitable for continuous use, otherwise cutting performance and service life are reduced |
Notices
| Diamond cutting discs become dull at excessively high rotation speeds and wear too rapidly at insufficient circumferential speeds |
| If ease of cutting decreases, the service life is reached. Re-sharpening is not possible. |
| Separate larger cross-sections of workpiece into several sections (oscillating cut) |
| Work without pressure – the weight of the machine is sufficient. Increased pressure causes increased wear. |
| Diamond cutting discs are designed for straight cutting. Cutting curves deforms the blade and results in core cracks and segment tear-offs – risk of injury! |
| Although the tool is safe, always wear safety goggles and protective clothing while working. |
| Observe the information on the label (max. rotation speed), the restrictions of use and the safety instructions |
| The direction arrow on the disc must match the machine's direction of rotation |
| Must not be used for lateral grinding |
| Use the appropriate protective cover |
| Clamping must be performed only by a trained specialist (do not use force, use clean clamping flanges of the same size, perform a test run) |
| If grinding tools are clamped or used incorrectly or are damaged, they represent a danger and may cause serious injury |
Review(s)
Product not yet rated.
