COLD WOOD GLUE D3 500ML

Highly resistant to water

Tested D3 and D4 quality according to DIN EN 204. Tested by Institute for Window Technology (Test Report No. 50524485)

Universal use

Transparent hardening with no visible glue joints

Glue tap for convenient pouring

Indoor doors

Stairs and handrails

Living room, kitchen, and bathroom furniture

Stationary edge coating with veneers and solid-wood strips

Assembly, surface, board joints and block gluing

Indoors with short-term exposure to flow-off or condensed water

Outdoors protected against weathering

Apply a thin, even layer on one side of the surface with applicator. For gluing joints using the fold process (room temperature) approx. 15-18min; using the hot process at temperatures of 40°C (104°F) approx. 8min. Use 120-150 g/m, depending on the type of application. Fresh splashes of adhesive can be removed with water. Older adhesive residue can be softened with acetone then rubbed off. Cold and hot processing for manual and machine applications. Processing at room temperature is recommended

The glue should not come in contact with stainless steel. In conjunction with some woods, such as oak, beech, cherry, and maple, discolouration can occur when in contact with bare metal. When gluing hardwood or wood cut across the grain, it is recommended the glue be applied on both joining sides.