FOAM GUN SP1

Non-runny, firm foam

Highly effective

Environmentally-friendly

Easy to use

Two diffusers

Great cleaning power

Loosens stubborn dirt reliably and quickly

Efficient use thanks to visible application of the cleaning agent

Optimum foam yield

Minimal waste water contamination thanks to conservative use of the cleaning agent

Ready for use in a short amount of time

Can be used over small or large areas

Cars, trucks, buses, construction machines, land and forestry, vehicle preparation, building facade cleaning, equipment maintenance and much more.

Remove loose dirt from the surface to be treated. Fill the supply tank of the SP1 Foam Gun with cleaning agent according to the mixing specifications from the manufacturer. Screw on the appropriate diffuser, depending on the application. Connect the compressed air. Rotate the green lever to the vertical position to open access to the cleaning agent. Cover the object in foam, allow the cleaner to work in (but not dry) and then rinse thoroughly with water

Do not use cleaning agents that contain acids, bases and/or are easily flammable. We recommend using Eco Cargo Wash, Eco Car Wash or Engine Wash. A constant air pressure of 6 – 8 bar (87 - 116 psi) is required for optimum output utilization.

After using the SP1 Foam Gun, fill the tank with water and rinse out the gun to remove cleaning agent residue from the unit. Then turn the green lever to the horizontal position and pull the trigger to remove the remaining water from the unit head