IC1600 Multi-Purpose Enamel Gloss Black 340g
892.1679830VRUS
- UNSPSC 31211507
Clearance
Delivery
In stock delivery from our warehouses.
0 Review(s)
Log in to see customized pricing and stock availability
Units/package: 1 72 Pkg(s) Maximum Quantity:
Units/package: 1 72 Pkg(s) Maximum Quantity:
IN-STORE
(Live stock shown is only for our stores located in Ontario.)
Not stocked in Vaughan, ON.
Not stocked in Mississauga, ON.
Product Details
Attribute | Value |
---|---|
Contents | 340 g |
EAN | 4065746643092 |
Features
Provides up to twice the coverage of competitive brands |
Dries to the touch in 12 minutes |
Resists chipping, fading and peeling |
Heat resistant to 93°C (200° F) |
Extra-wide comfort nozzle prevents finger fatigue |
Sprays from any angle, even upside down |
Applications
For indoor/outdoor industrial and maintenance applications. |
Instructions
Preparation: Remove all dirt, grease, oil, salt, and chemical contaminants. Scuff sanding may be required on very smooth surfaces ex. thoroughly cured, hard or gloss coatings to maximize adhesion. |
Application: Use when temperature is above 10°C (50°F) and humidity is below 85%. Surface temperature must be between 10-38°C (50-100°F). Protect surrounding surfaces from overspray. Use a primer on bare or rusted surfaces. Shake can for one minute after mixing ball is heard. Hold can 10-14” from surface. Apply several light coats a few minutes apart to avoid drips and runs. |
Clean-up: Wipe off tip before storing. Remove wet paint with xylene or mineral spirits. |
Clogging: If the valve clogs, twist and pull off spray tip and rinse in a solvent such as mineral spirits. Do not insert any object into can valve opening. |
Notices
Not for use on galvanized steel. |
May not be compatible with some plastics, it is strongly suggested to test a small test patch. |
This information is based on our experience. Preliminary tests are advised before use. |
Documents & Videos
Review(s)
Product not yet rated.