COLD WOOD GLUE D3 28.3L
892.100150
- UNSPSC 31201610
Delivery
In stock delivery from our warehouses.
0 Review(s)
For gluing all types of wood (hard, soft, and exotic woods and particle boards). Ideal for door and window construction, and for exterior gluing work
Promo Price : $305.69
$382.11
Units/package: 1
Units/package: 1
IN-STORE
(Live stock shown is only for our stores located in Ontario.)
Temporarily out of stock in Vaughan, ON and Mississauga, ON as of 12:54 PM.
Product Details
Attribute | Value |
---|---|
Contents | 28 kg |
EAN | 4045989457977 |
Features
Highly resistant to water |
Tested D3 and D4 quality according to DIN EN 204. Tested by Institute for Window Technology (Test Report No. 50524485) |
Universal use |
Transparent hardening with no visible glue joints |
Glue tap for convenient pouring |
Applications
Indoor doors |
Stairs and handrails |
Living room, kitchen, and bathroom furniture |
Stationary edge coating with veneers and solid-wood strips |
Assembly, surface, board joints and block gluing |
Indoors with short-term exposure to flow-off or condensed water |
Outdoors protected against weathering |
Instructions
Apply a thin, even layer on one side of the surface with applicator. For gluing joints using the fold process (room temperature) approx. 15-18min; using the hot process at temperatures of 40°C (104°F) approx. 8min. Use 120-150 g/m, depending on the type of application. Fresh splashes of adhesive can be removed with water. Older adhesive residue can be softened with acetone then rubbed off. Cold and hot processing for manual and machine applications. Processing at room temperature is recommended
Notices
The glue should not come in contact with stainless steel. In conjunction with some woods, such as oak, beech, cherry, and maple, discolouration can occur when in contact with bare metal. When gluing hardwood or wood cut across the grain, it is recommended the glue be applied on both joining sides.
Documents & Videos
Review(s)
Product not yet rated.