Free Gift: Get a FREE Drill-/Screw-driving Set when you spend $850 or more. Use code TOOLKIT850.

3/4 X 4-1/4 ZINC WEDGE ANCHOR

904.2634414 - UNSPSC 31162102
3/4 X 4-1/4 ZINC WEDGE ANCHOR 3/4 X 4-1/4 ZINC WEDGE ANCHOR
3/4 X 4-1/4 ZINC WEDGE ANCHOR
Clearance

Delivery

No stock for delivery. -
0 Review(s)

Unavailable

IN-STORE

Not stocked in Vaughan, ON.

Call us at (289) 474-5447. Learn more about our 24/7 Würth Shop.

Product Details

Attribute Value
Anchor Diameter 3/4 "
Anchor Length 4-1/4 "
Material Carbon Steel, zinc plated
Nominal Embedment 4-5/8 "
Min. Anchor Spacing 7-1/2 "
Min. Edge Distance 3-3/8 "
Thread Length 2-3/8 "
EAN 4045989969562

Benefits & Advantage

Excellent for setting immediately.
Required hole diameter equals anchor diameter.
Can be loaded immediately.
Can be set in a bottomless hole
Simple installation.
Nut and washer supplied in package.
Available in zinc plated carbon steel, 303/304 stainless steel or carbon steel, mechanically galvanized Class 65.
ROHS compliant except for Grade 5

Instructions

Drill hole 1/2” to 1” deeper than anchor embedment. Clean hole of debris.
With nut threaded past the end of stud, hammer into position.
Tighten finger tight plus an additional 3-5 turns with wrench.
If anchor spins in hole, force anchor up using screwdriver until clip binds into concrete.

Notices

Do not use in brick or block. Not advised for use where vibratory loads are high. Oversize holes are detrimental and will reduce performance data from that published.
APPROVALS/LISTINGS: • G.S.A. Spec FF-S-325C, Group II, Type 4, Class 1 • ICC ESR-3782 C-STL, ZP 1/4” SS • Metro Dade NCA No: 10-0928.01

Customers Also Viewed

Is Often Bought With

You Might Also Like

Review(s)

Product not yet rated.