REPLAST ME 10 MIN URETHANE ADHESIVE 220 ML
893.505220
- UNSPSC 31201635
0893505220083 1
0893505220083 1
New
Delivery
No stock for delivery. -
Two-component polyurethane adhesive for bonding and repairing plastic parts. Available in a wide range of cure times and sizes to handle every job.
REPLAST ME 10 MIN URETHANE ADHESIVE 220 ML — 893.505220
- REPLAST ME 30 SEC URETHANE ADHESIVE 220 ML — 893.501220
- REPLAST ME 90 SEC URETHANE ADHESIVE 220 ML — 893.502220
- REPLAST ME 3.5 MIN URETHANE ADHESIVE 220 ML — 893.503220
- REPLAST ME 3.5 MIN URETHANE ADHESIVE 400 ML — 893.503440
- REPLAST ME 35 MIN URETHANE ADHESIVE 220 ML — 893.504220
- REPLAST ME 35 MIN URETHANE ADHESIVE 400 ML — 893.504400
- REPLAST ME 10 MIN URETHANE ADHESIVE 220 ML — 893.505220
- REPLAST ME 10 MIN URETHANE ADHESIVE 400 ML — 893.505400
IN-STORE
(Live stock shown is only for our stores located in Ontario.)
Not stocked in Vaughan, ON.
Not stocked in Mississauga, ON.
Product Details
| Attribute | Value |
|---|---|
| Contents | 220 mL |
| Container | Dual Cartridge, 1:1 Ratio |
| Chemical basis | 2K Polyurethane |
| Colour | Black |
| Working Time | 10 min |
| Clamp Time | 30 min |
| Sand Time | 60 min |
| Cure Time | 24 hr |
| Application Temperature | 15 to 25°C |
| Temperature Resistance | -40 to 100°C |
| Hardness | 73 (Shore D) |
| Solvent-free | Yes |
| Silicone-free | Yes |
| Shelf Life | 24 months |
| Nozzle | 18 Element |
| Case Quantity | 6 |
| EAN | 4068362637841 |
Features
| Rebuild, reshape and bond almost all types of plastic. |
| Excellent bond to many other substrates such as fibreglass (GRP), SMC, metal, glass, wood etc. |
| Meets OEM specifications. |
| Fast curing properties allow for early sanding and painting, reducing turnaround time. |
| Good sag resistance, suitable for vertical applications. |
| Sandable |
| Excellent chemical and UV resistance. |
Benefits & Advantage
| REPLAST “ME”, micro-emissions formula is certified in accordance to EMICODE EC1 PLUS, meaning this product features very low emissions of harmful substances. |
| Supports safer working conditions compared to leading competitive products (no GHS08 symbol and no H351 hazard statement). |
| Long shelf life (24 months). |
Applications
| For easy repair and connection of plastic parts such as spoilers, radiator grilles, trim clips, headlight brackets, bumper covers, bumpers, wheel arches etc. |
| Applicable in most automotive and heavy truck applications. |
Instructions
Use with 18 element mixing nozzle, and dual cartridge dispensing guns.
Notices
| Cure times will vary depending on temperature and humidity. The listed values are based on a temperature of 23°C and 50% relative humidity. |
| If needed, curing can be accelerated using an infrared heat source. It is recommended to heat REPLAST ME to a maximum temperature of 50°C for at least 5 minutes. |
| Not suitable for PE (polyethylene), PP (polypropylene) or PTFE (polytetrafluoroethylene). There may be adhesion problems in individual cases due to the coatings and release agents used in some cases in the plastic production process. Check material compatibility on a non-visible area if necessary. |
.jpg?auto=compress%2Cformat&height=100&width=220&trim=color&trimcolor=FFFFFF&trimTol=15&ixlib=csharp-3.2.1.0&s=3b619c68a0500a2e3f23db8d2b64db97)
