EVAPOFLEX AC TOOL W/ CASE
5861.764000
- UNSPSC 73161517
5861764000961 1
5861764000961 1
New
Delivery
No stock for delivery. -
A new, innovative and efficient way to clean the evaporator. Equipped with a LED monitor, flexible probe camera and high pressure sprayer.
IN-STORE
(Live stock shown is only for our stores located in Ontario.)
Not stocked in Vaughan, ON.
Not stocked in Mississauga, ON.
Product Details
| Attribute | Value |
|---|---|
| Hose Diameter | 5 mm (Max 10 mm at tip) |
| Hose Length | 75 cm |
| Material | Plastic |
| Power Supply | Pneumatic |
| Connection Type | Series 2000, 1/4 inch fitting |
| Battery type | Rechargeable |
| Min./Max. Operating Pressure | 6 bar/8bar (87 PSI/116 PSI) |
| Air Consumption | 10 l/min @ 6 bar |
| Warranty | 1 Year Manufacturer Defects |
| EAN | 4099618872709 |
Features
| Pneumatic tool with a 1/4 inch series 2000 fitting |
| Flexible rubber hose probe 75mm length and 5mm width. The camera end has a 10mm height and 5mm width |
| Durable hard plastic body |
| Max 8 bar operating pressure |
| Air consumption: 10L/min at 6 bar |
| Estimated 2-4 hour battery life on both tool and camera screen |
Benefits & Advantage
| Comes in a Wurth System case for safe storage. |
| Detachable camera to easily show customers the photos and videos on screen. |
| 8G of storage so multiple services can be video taped and saved. Easy to clear SD card storage. |
| High resolution camera and large LED screen makes viewing easy. |
| Probe camera equipped with an LED light that has 3 levels of brightness for clear images. |
| One click on/off trigger allows user to spray Evapoflex without holding down the trigger for the duration of the service. |
| Power button on Evapoflex means you can keep the air connected without having the tool running. |
Applications
For cleaning the evaporator on passenger vehicles, buses, commerical trucks. Appropriate for any make and model.
Contents
| Evapoflex Tool with 75mm Camera and Chemical Spray Probe and 1/4 inch Series 2000 nipple |
| Detachable Plastic Chemical Resevoir Bottle |
| Detachable LED Camera Screen and Microfibre Cloth |
| USB-C Charger Cable |
| 8G SD Card |
| Muti-Lingual Instruction Booklet |
| Wurth System Case |
Instructions
| See Instuction Manual for complete instructions on how to use the system. |
| Charge the Evapoflex tool and LED screen. |
| Access the evaporator. For most makes and models the evaporator can be access in one of 3 ways: behind the cabin air filter, through the dash vents or through the drain hose under the vehicle. |
| Attach the LED screen to the Evapoflex tool and inspect the condition of Evaporator. Ensure you install the SD card if you plan to take video or photos. |
| Fill resevoir bottle with Evapo Wash solution and attach to Evapoflex tool. |
| Connect the system to compressed air line. |
| Spray the Evapo Wash on the evaporator from left to right in an up and down motion using the camera as a guide. Allow the foam to work for approximately 5 - 10 mins. |
| Fill resevoir bottle with Evapo Flush solution and attach to Evapoflex tool. |
| Spray the Evapo Flush solution on the evaporator from left to right in an up and down motion using the camera as a guide. Ensure all foam has been rinsed off. |
| Use the camera to inspect the final results and take photos or video if required. Repeat process if necessary. Extremely soiled evaporators may need a second treatment. |
Notices
| Most makes and models the evaporator is easily accessible through one of three access points, however, there may be some models that do not have a readily accessible evaporator. Ensure the technician checks for accessibility before using. |
| To be used only with recommended Wurth Chemicals. The use of other chemicals may cause damage and will void any warranty. |
Warranty
Comes with a 1-year warranty. Does not cover damage due to mis-use. Warranty void if chemicals other than the approved Evapoflex chemicals (Evapo Wash - 893.764015 and Evapo Flush - 893.764017) are used.
